LIE Home · Issue Contents 

Study on the Microstructure and Properties of AlCoCrFeNiCu Coatings with Different Overlap Rates
Juan Ma, Fanming Guo, Fuquan Zhang, Jilei Ren, Guiguan Zhang, Yanhou Liu and Xiang Cheng

This study investigates the effects of varying lap joining rates on the microstructure, hardness, and corrosion resistance of high-entropy alloy coatings. An AlCoCrFeNiCu high-entropy alloy coating was fabricated using a coaxial powder feeding method. The surface morphology and cross-sectional characteristics of the coatings produced at different lap joining rates were systematically examined along with the microstructure, elemental distribution, phase structure, microhardness, wear resistance, and corrosion performance. Results indicate that a decrease in the lap joining rate reduces coating thickness while increasing its width. At a 50% lap joining rate, the cross-sectional analysis revealed no discernible cracks, whereas higher joining rates led to the emergence of equiaxed, honeycomb-like, and columnar grains. The phase structure remained consistent, exhibiting a dual-phase face-centered cubic (FCC) and body-centered cubic (BCC) configuration. Notably, the maximum microhardness of 834.1 HV0.5 was attained at a 50% lap joining rate, which also delivered optimal wear resistance with a wear volume of 0.09 mm³. Moreover, compared with the substrate, the coating exhibited a positive shift in the self-corrosion potential and a one-order-of-magnitude reduction in the self-corrosion current, thus demonstrating significantly enhanced corrosion resistance.

Keywords: Laser cladding, High-entropy alloy, Coating, Surface treatment, Corrosion resistance, Wear resistance

Full Text (IP)