Laser Exponential Pulse Heating of Lime Stone: Thermal Stress Analysis
B.S. Yilbas, A. Arsalan, S. Bin Mansoor, A.A. Alrashed, S.L. Lacouture Caycedo, S. Batarseh, D.P. Alerigi, B. Aldakkan and S. Alghamdi
The present study investigates the thermomechanical behavior of Indiana Limestone under high-power laser heating pulse. The model used integrates transient heat conduction with linear thermoelastic wave equations. Incorporating the Laplace transform-based framework, the substrate thermal and stress fields were evaluated via introducing the laser pulse decay parameter (β). In the analysis, the volumetric absorption model is adopted in line with the Beer–Lambert law. We demonstrated that a continuous temperature increase is resulted as the laser pulse intensity decay rate becomes slow. Alternatively, at high laser pulse intensity decay rate, temperature rise follows almost quasi-steady state behavior with a reduced peak temperature, which is associated with the limited integrated total energy delivery. Owing to the substrate high acoustic wave speed, stress wave transition occurs at sub-microsecond scales while leading to a quasi-static thermal stress evolution driven by temperature gradients rather than dynamic wave-front propagation. Subsurface zones undergo transient compressive stress followed by a moving tensile stress wave. Increasing laser pulse parameter intensifies tensile stress in the early heating stage and produces stress peaks between 24 MPa and 32 MPa in the surface region, which exceeds the material tensile strength (5 MPa) by a factor of 4.8 to 6.4. Alternatively, compressive stress remains below the material limit (50 MPa) while preventing yielding failure. Hence, localized tensile stress serves as the primary thermal stress mechanism inside the laser irradiated substrate.
Keywords: Laser pulse heating, lime stone, temperature rise, thermal stresses
