p. 201-212
Superficial Stress Reduction by Laser Annealing: Preliminary Study
C. Barile, C. Casavola and G. Pappalettera
Abstract
Full Text (IP)
p. 213-226
Automatic Manufacture of Barcode Rod Tape Using Laser Ablation and Laser Interferometry
M. Zhao, Q-H. Huang, L-J. Zhu and Z-M. Qiu
Abstract
Full Text (IP)
p. 227-243
Influence of Processing Gas Composition on Laser Colouring of Commercially Pure Titanium
N.Y. Khafaji, A.G. Demir, Z.A. Taha and B. Previtali
Abstract
Full Text (IP)
p. 245-256
Laser Shock Peening (LSP) to Improve the Metallurgical and Mechanical Properties of Gas Tungsten Arc Welding (GTAW) Joints in Hastelloy C-276
S.A. Nithin Joseph Reddy, S. Prabhakaran, S. Kalainathan, N. Arivazhagan and M. Manikandan
Abstract
Full Text (IP)
p. 257-281
Development and Performance Evaluation of a Fast and Accurate Cost-effective Three-Dimensional (3-D) Laser Scanner
W-P. Zong, G-Y. LI, L. Wang, M-L. LI and Y-L. Zhou
Abstract
Full Text (IP)
p. 283-302
Laser Hardfacing of Colmonoy-5 (Ni-Cr-Si-B-C) Powder onto 316LN Austenitic Stainless Steel: Effect of Powder Feed Rate on Microstructure, Mechanical Properties and Tribological Behavior
S. Gnanasekaran, G. Padmanaban, V. Balasubramanian, H. Kumar and S.K. Albert
Abstract
Full Text (IP)
p. 303-321
Microstructure Characteristics and Performance of a Novel Composite Stellite Alloy Fabricated by Laser Cladding
G-L. Wu, F-C. Ren, J. Zhang, Q-L. Zhang, R. Liu and J-H. Yao
Abstract
Full Text (IP)
p. 323-336
Analysis of the Microcrack Inducing Mechanism Resulting from Graphite Inclusion in the Bond Area and the Influence of Process Parameters for the Laser Repairing of Grey Cast Iron
P. Yi, X-H. Zhan, P-F. Xiao, Y-C. Liu and Y-J. Shi
Abstract
Full Text (IP)
p. 337-361
Multi-Objective Optimization in Laser Trepan Drilling of Inconel-718 Sheet by Using a Genetic Algorithm (Ga)
K.L. Dhaker and A.K. Pandey
Abstract
Full Text (IP)
p. 363-380
Nickel-Based Gradient Coating on Copper Prepared by the Combination of Laser Alloying and Laser Cladding Technologies
J. Zhao, G. Liu, B. Ma, Z-Y. Zheng, L. Jia and L. Cui
Abstract
Full Text (IP)
p. 381-390
The Compressive Behavior of a Porous 316l Stainless Steel Prepared by Selective Laser Melting
B. Liu, Z.Y. Zhao, P.K. Bai, M.J. Liang and R.G. Guan
Abstract
Full Text (IP)